 $16.50
ea |
Trapezoid Diamond Tools.
If you are looking for inexpensive then here you go at only
$16.50 ea or
$148.50 9 piece set for premium.
30- 200 Grit Hard, Medium or Soft Bonds.
Levetec sells the best value we can make!
|
DiaCrete™ Trapezoid Floor grinding Pads
DiaCrete™ Floor grinding Pads
Only
$23.00 ea or
$207.00 9 piece set.
30-200 Grit Hard, Medium or Soft Bonds.
These are premium tools that you would pay over
$50
each elsewhere
|
 
$23.00
ea |
DiaCrete™ Trapezoid Floor grinding Pads are
12 mm or 1/2" tall and 25mm or 1" wide. A lot of tools are both
shorter and smaller diameter too.
DiaCrete™ Floor grinding Pads
Only
$23.00 ea or
$207.00 9 piece set.
30-200 Grit Hard, Medium or Soft Bonds.
These are premium tools that you would pay over
$50
each elsewhere
|
Not only taller but thicker plates.
 |
 $23.00
ea
|
Slid-In Diamond Tools.
If you have these types of tools we can reload
them for only
$18.00 ea for
premium square segments or
$23.00 ea. New for
premium in 30- 200 Grit Hard, Medium or Soft Bonds. Ready lock style
Levetec sells the best value we can find!
|
 $18.00
Re-loaded |
Tap On Diamond Tools.
If you have these types of tools we can reload
them for only
$18.00 ea for
square segments or
$23.00 ea. for 25 mm
round segments in 30- 200 Grit Hard, Medium or Soft Bonds.
Levetec sells the best value we can find!
|
 $23.00
ea. |
Fast Change Diamond Tools.
If you have the Fast
Change system we can sell them to you for
$23.00 and we can reload
them for only
$18.00 ea for
square segments or
$23.00 ea. for 25 mm
round segments in 30- 200 Grit Hard, Medium or Soft Bonds.
Levetec sells the best value we can find!
|
DCT Combo Scrapper Tools
The DCT Combo Coatings tool works by riding on the diamond segment
which limits travel of the tool into the concrete surface. Perfect for
lighter machines below 500 lbs. This allows
the two 1/4 heads to scrap away coatings or Glue, but not damage the concrete
itself. The trailing segment itself will also cut through thin mil coatings that the PCD
scrappers miss, helping remove coatings. This tool is very aggressive and will work on lighter machines
|
 $29.00
ea.
Click
here for more info: |
 |
Diacrete Metal Bond PlateTools.
Designed to fit your machine.
From
$49.00 each
Click Here! for more info:
|
3" Metal Bond Tool / Lippage Tool
3" Metal Bond Tool with multiple mount holes.
Also you can use any 3" resin tools on the 2" plug with 3" velcro
mount. ~Will fit on trapezoid hole pattern. ~
18/20#, 30/40#, 50/60#, 60/80#,
120/150#
Medium Bond
|
|
Velcro Back Tools
 |
DiaCrete™ Flares Floor grinding Tools - Velcro
back-
You have the choice of the tapered edge 3 inch Tool if you are on a
floor with a rough profile, or you can get the more aggressive 3 inch
Flare leveling tool. They both come with threaded bolt holes to make
sure they stay on the velcro pad of a high speed machine. These are also
excellent for using with floor buffers if you do not own a grinder
machine. The non tapered tool also will get closer to the wall when
grinding.
|
2" Plug tools
You can instantly adjust the handle to be more comfortable, or to tip the machine over or to store the handle outr of the way.
One squeeze of the lever and move is to position.
2" plug Velcro tool
holder |
|
Aggressive Cutting Tools
  |
Extra 2" Plug Tools and X Cut Tool.
You have the choice of the arrow shape 3 inch tool if you
want a more
aggresive tool, available in 30/40 Grit.
The X cut 2" plug is very aggressive and available in a 20-25 Grit |
Resin Diamond Tools
To bring a floor up to a high shine it is necessary to use
Resin tools to polish the substrate to the look you seek or to coat,
seal or polish. Click on the picture to see the Resin diamond tooling.
|
Click
here for more info:
|
Click Here!
for Diamond Catalog.
Contact
Levetec
