Klindex Expander 750

Expander 750 by Klindex A better Machine at $21,900

THE BEST OF THE BEST.. THE FINAL WORD ON THE SUBJECT OF BUSH-HAMMERING, GRINDING, HONING AND POLISHING ON LARGE MARBLE, GRANITE, TERRAZZO AND CONCRETE FLOORS!

EXPANDER tackles large commercial floors like no other machine! Its patented PLANETARY SYSTEM driven not by belts but by tempered-steel gears, sets EXPANDER in a league of its own over the competition. Thanks to this exclusive technology, IT IS the only machine of its kind with an adjustable downward pressure feature. Nothing is a challenge for EXPANDER! IT HAS A POWERFUL 15 HP motor and works COMFORTABLY even in smaller areas. An Electric actuator adjusts the working pressure and adjusts the elevation of the machine’s planetary head.

The front wheel. For very uneven floors and for transport. It can be easily and quickly removed.

QUICK SWAP to change tools without a hammer and or other tools. Only use your hands!!

Electric actuator to adjust the elevation of the machine’s head. Expander is a revolutionary new concept in grinding machines, it pivots from a center point right over the center of gravity.
The grinding head can be raised and lower electrically so that you can mill off the high points and then lowered as you need to, you are also able to remove the front wheel to put the full weight of the machine onto the grinding pads.
With a strong 15 hp motor and high torque gearbox no job is to big, and the down pressure that is put onto the grinding pads is greater then most grinders as the full weight of the machine is centered over the grinding head and the machine can be tipped forward for agressive cutting when the wheel has been removed.

Model
EXPANDER 750
Motor
15 Hp (11 Kw)
Volt
208-240 or 380-480 Three Phase
Weight
305 kg or 760 lbs
Work Section
31" or 750 mm
Speed
variable speed 300-1300 rpm
Tank
46 lt
Tools
3x240mm or 10"

View Video of Expander 750 (Superconcrete floors Grinding and Polishing)

video View Video of Expander 750 (Marble floors Grinding and Polishing)

View Diamond Tools for Marble, Terrazzo, Conglomerate, Stone floors

View Diamond Tools for Granite and Gres floors

View Diamond Tools for Polished Concrete, Cement floors

View Diamond Tools for Surface and Floor Preparation

View Diamond Tools for Resins, Glues Removing

View Diamond Tools for Bush-hammering

View Accessories, Products for Expander 750

Download Depliant Expander 750

Download Manual Expander 750

Made in Italy the home of polished floors for over 2500 years.
Large commercial floors have found their match in the EXPANDER – another Levetec statement of cutting-edge technology! Its PATENTED PLANETARY SYSTEM is not driven by belts but by Hardened Gears this sets the EXPANDER in a league of its own, with no competition. Thanks to this exclusive technology, it’s the only machine of its kind with an adjustable grind height feature. With the weight centered over the grinding head, there is no need depend on brute force or a unmanageably heavy machine to get your best results. The cutting heads do not just ride over bumps on the floor, but because of it firm gear driven cutting heads, it grinds through and levels the floor. But if it needs to flex over a rigid swell the main flex joint made by BMW is able to bend in more directions then it's competition. No job is too big a challenge to the EXPANDER! Bush-hammering (scarification), grinding, Grinding and polishing are achieved with a productivity rate that is sometimes 3 or 4 times other machines of the same size. Using the PCD cutter teeth you can even remove VCT tile from a floor! This would ruin any of the competitors machines. A powerful 15 HP motor powers this machine, yet it’s so well balanced that it can be literally controlled with two fingers! Narrow passages Tight Corners? No problem: the EXPANDER lays claim to a one-of-a-kind feature by which it’s possible to adjust the down pressure on the grinding pads! The features are better thought out and better engineered.

Model	EXPANDER 750
Motor	15 Hp (11 Kw)
Volt	208-240 or 380-480 Three Phase
Weight	305 kg or 760 lbs
Work Section	31" or 750 mm
Speed	variable speed 300-1300 rpm
Tank	46 lt
Tools	3x240mm or 10"