Hercules 530 is a new line of floor grinding and
polishing machines (for marble, granite, polished concrete, gres,
conglomerate, stone, industrial surfaces, cement floors, etc) with
“counter rotating planetary with steel gears”. Very easy to handle,
reliable, rubust and long-lasting. Thanks to easy handling, this line is
specially suitable to expert and novice alike. The productivity is
superior when compared to any other same sized machines built with a
“belt drive” This is a extremely strong Floor Grinding machine with a
metal gear Planetary head. No belt to break! POWERFULL 4HP THREE-PHASE
MOTOR, but only needs a SINGLE-PHASE SUPPLY
Feature:
Specifications:
Motor
Three Phase 4 Hp 3Kw
Voltage
200-240 Volt Single or 3 Phase
Weight
290Lb / 140Kg
Working Width
21 inches (530mm)
Speed
300-1500 RPM on the grinding
head
Water Tank
18 liters / 3.7 Gallons
Abrasive Plates
Three 8" 200 mm grinding heads
on Counter Rotating Drum.
Quick Attack Change Tool System.
The Hercules 530 comes with the Quick Attack change tool mounting
system. A range of custom and industry standard tools are available for
this system. The system can mount scrapper tools ,regular metal
trapezoid tools, and velcro mount tools.
* Production numbers may vary according to surface conditions, diamonds used, equipment operator, etc.
Vacuums
Because it is important to use a functional Hepa vacuum if you are going to grind dry, Levetec has a supply of low cost HEPA filter vacuums to do the job. Filtration is an enormous issue when it comes to industrial vacuum cleaners. After all, if you take the time to vacuum an area, the last thing you want is the same material that you just vacuumed to be exhausted right back into the atmosphere. Depending on what you're collecting, the dust or debris may be hazardous to your product finish, or even your health. We, at Levetec, realize the importance of ultra-efficient filtration systems and put our guarantee on every industrial vacuum cleaner we sell.
Metal Diamond Tools
To grind floors effectively it is necessary to use metal tools to grind down through the cap and leave a substrate that is ready to coat, seal or polish. Click on the picture to see the metal diamond tooling.
Resin Diamond Tools
To bring a floor up to a high shine it is necessary to use
Resin tools to polish the substrate to the look you seek or to coat,
seal or polish. Click on the picture to see the Resin diamond tooling.